944.00
3M 4991 VHB Grey Tape - 18MM X 6.4M
5 out of 5
(1)
- 3Mâ„¢ VHBâ„¢ Tape is a high performance double-coated pressure sensitive acrylic foam tape. 3Mâ„¢ VHBâ„¢ Tapes have been used for many applications in the construction industry, including the manufacture of architectural panels for curtain walls and exterior building cladding. 3Mâ„¢ VHBâ„¢ Tapes are ideal for use in many exterior and interior architectural panel applications. In many situations, 3Mâ„¢ VHBâ„¢ Tapes can replace rivets, spot welds, liquid adhesives, and other permanent fasteners. Fast and easy-to-use permanent bonding method provides high strength and long-term durability. Eliminate drilling, grinding, refinishing, screwing, welding and associated clean-up. Pressure sensitive adhesive bonds on contact to provide immediate handling strength.
- 3M
1593.00
3M 4991 VHB Grey Tape - 25MM X 6.4M
5 out of 5
(1)
- 3Mâ„¢ VHBâ„¢ Tape is a high performance double-coated pressure sensitive acrylic foam tape. 3Mâ„¢ VHBâ„¢ Tapes have been used for many applications in the construction industry, including the manufacture of architectural panels for curtain walls and exterior building cladding. 3Mâ„¢ VHBâ„¢ Tapes are ideal for use in many exterior and interior architectural panel applications. In many situations, 3Mâ„¢ VHBâ„¢ Tapes can replace rivets, spot welds, liquid adhesives, and other permanent fasteners. Fast and easy-to-use permanent bonding method provides high strength and long-term durability. Eliminate drilling, grinding, refinishing, screwing, welding and associated clean-up. Pressure sensitive adhesive bonds on contact to provide immediate handling strength.
- 3M
520.00
3M SGT VHB GREY TAPE - 12MM X 6.4M
5 out of 5
(1)
- 3M VHB Structural Glazing Tape is a double-coated 0.090 in (2.3 mm) pressure sensitive adhesive tape for bonding many painted metals, as well as unpainted metals, and higher surface energy plastics. 3M VHB Structural Glazing Tape is appropriate for applications, which demand a thicker conformable product.
- 3M
710.00
3M SGT VHB GREY TAPE - 18MM X 6.4M
5 out of 5
(1)
- 3M VHB Structural Glazing Tape is a double-coated 0.090 in. (2.3 mm) pressure sensitive adhesive tape for bonding many painted metals, as well as unpainted metals, and higher surface energy plastics. 3M VHB Structural Glazing Tape is appropriate for applications, which demand a thicker conformable product.
- 3M
1250.00
3M SGT VHB GREY TAPE - 25MM X 6.4M
5 out of 5
(1)
- 3M VHB Structural Glazing Tape is a double-coated 0.090 in. (2.3 mm) pressure sensitive adhesive tape for bonding many painted metals, as well as unpainted metals, and higher surface energy plastics. 3M VHB Structural Glazing Tape is appropriate for applications, which demand a thicker conformable product.
- 3M
520.00
3M - G23F - VHB BLACK TAPE - 12MM X 6.4M
5 out of 5
(1)
- 3M VHB Structural Glazing Tape is a double-coated 0.090 in. (2.3 mm) pressure sensitive adhesive tape for bonding many painted metals, as well as unpainted metals, and higher surface energy plastics. 3M VHB Structural Glazing Tape is appropriate for applications, which demand a thicker conformable product.
- 3M
710.00
3M - G23F - VHB BLACK TAPE - 18MM X 6.4M
5 out of 5
(1)
- 3M VHB Structural Glazing Tape is a double-coated 0.090 in. (2.3 mm) pressure sensitive adhesive tape for bonding many painted metals, as well as unpainted metals, and higher surface energy plastics. 3M VHB Structural Glazing Tape is appropriate for applications, which demand a thicker conformable product.
- 3M
1250.00
3M - G23F - VHB GREY TAPE - 25MM X 6.4M
5 out of 5
(1)
- 3M VHB Structural Glazing Tape is a double-coated 0.090 in (2.3 mm) pressure sensitive adhesive tape for bonding many painted metals, as well as unpainted metals, and higher surface energy plastics. 3M VHB Structural Glazing Tape is appropriate for applications, which demand a thicker conformable product. Highly engineered acrylic adhesive provides long term durability, but removes cleanly after harsh masking applications. Creates a permanent seal against water, moisture and more. Pressure sensitive adhesive bonds on contact to provide immediate handling strength.
- 3M
420.00
3M - G11F - VHB GREY TAPE - 12MM X 8.22M
5 out of 5
(1)
- 3Mâ„¢ VHBâ„¢ Tape is a high performance double-coated pressure sensitive acrylic foam tape. 3Mâ„¢ VHBâ„¢ Tapes have been used for many applications in the construction industry, including the manufacture of architectural panels for curtain walls and exterior building cladding. 3Mâ„¢ VHBâ„¢ Tapes are ideal for use in many exterior and interior architectural panel applications. In many situations, 3Mâ„¢ VHBâ„¢ Tapes can replace rivets, spot welds, liquid adhesives, and other permanent fasteners.
- 3M
0.00
3M - G11F - VHB GREY TAPE - 18MM X 8.22M
5 out of 5
(1)
- 3Mâ„¢ VHBâ„¢ Tape is a high performance double-coated pressure sensitive acrylic foam tape. 3Mâ„¢ VHBâ„¢ Tapes have been used for many applications in the construction industry, including the manufacture of architectural panels for curtain walls and exterior building cladding. 3Mâ„¢ VHBâ„¢ Tapes are ideal for use in many exterior and interior architectural panel applications. In many situations, 3Mâ„¢ VHBâ„¢ Tapes can replace rivets, spot welds, liquid adhesives, and other permanent fasteners.
- 3M
1000.00
3M - G11F - VHB GREY TAPE - 25MM X 8.22M
5 out of 5
(1)
- 3Mâ„¢ VHBâ„¢ Tape is a high performance double-coated pressure sensitive acrylic foam tape. 3Mâ„¢ VHBâ„¢ Tapes have been used for many applications in the construction industry, including the manufacture of architectural panels for curtain walls and exterior building cladding. 3Mâ„¢ VHBâ„¢ Tapes are ideal for use in many exterior and interior architectural panel applications. In many situations, 3Mâ„¢ VHBâ„¢ Tapes can replace rivets, spot welds, liquid adhesives, and other permanent fasteners. Fast and easy-to-use permanent bonding method provides high strength and long-term durability. Creates a permanent seal against water, moisture and more. Allows the use of thinner, lighter weight and dissimilar materials.
- 3M
950.00
3M - 4941 - VHB Grey Tape 12mm x 8.22m
5 out of 5
(1)
- 3Mâ„¢ VHBâ„¢ Tape 4941. It is a grey, 0.045 in (1.1 mm), multi-purpose acrylic adhesive with a conformable, foam core. It can replace rivets, welds and screws. The fast and easy to use permanent bonding method provides high strength and long-term durability. It offers design flexibility with its viscoelasticity and powerful ability to bond to a variety of surfaces. Fast and easy-to-use permanent bonding method provides high strength and long-term durability. Eliminate drilling, grinding, refinishing, screwing, welding and associated clean-up. Pressure sensitive adhesive bonds on contact to provide immediate handling strength.
- 3M
1530.00
3M - 4941 - VHB Grey Tape 18mm x 8.22m
5 out of 5
(1)
- 3Mâ„¢ VHBâ„¢ Tape 4941. It is a grey, 0.045 in (1.1 mm), multi-purpose acrylic adhesive with a conformable, foam core. It can replace rivets, welds and screws. The fast and easy to use permanent bonding method provides high strength and long-term durability. It offers design flexibility with its viscoelasticity and powerful ability to bond to a variety of surfaces. Fast and easy-to-use permanent bonding method provides high strength and long-term durability. Eliminate drilling, grinding, refinishing, screwing, welding and associated clean-up. Pressure sensitive adhesive bonds on contact to provide immediate handling strength.
- 3M
1830.00
3M - 4941 - VHB Grey Tape 25mm x 8.22m
5 out of 5
(1)
- 3Mâ„¢ VHBâ„¢ Tape 4941. It is a grey, 0.045 in (1.1 mm), multi-purpose acrylic adhesive with a conformable, foam core. It can replace rivets, welds and screws. The fast and easy to use permanent bonding method provides high strength and long-term durability. It offers design flexibility with its viscoelasticity and powerful ability to bond to a variety of surfaces. Fast and easy-to-use permanent bonding method provides high strength and long-term durability. Eliminate drilling, grinding, refinishing, screwing, welding and associated clean-up. Pressure sensitive adhesive bonds on contact to provide immediate handling strength.
- 3M
47430.00
3M - 4941 - VHB Grey Tape 584.22mm x 8.22m
5 out of 5
(1)
- 3Mâ„¢ VHBâ„¢ Tape 4941. It is a grey, 0.045 in (1.1 mm), multi-purpose acrylic adhesive with a conformable, foam core. It can replace rivets, welds and screws. The fast and easy to use permanent bonding method provides high strength and long-term durability. It offers design flexibility with its viscoelasticity and powerful ability to bond to a variety of surfaces. Fast and easy-to-use permanent bonding method provides high strength and long-term durability. Eliminate drilling, grinding, refinishing, screwing, welding and associated clean-up. Pressure sensitive adhesive bonds on contact to provide immediate handling strength.
- 3M
250.00
3M - AFT - GREY TAPE BLISTER PACKING - 12MM X 4M
5 out of 5
(1)
- Attachment Tape is a high performance acrylic foam tape used widely for a variety of exterior & interior application. Acrylic adhesive is formulated for interior and exterior trim attachment to automotive substrates. Conformable closed cell acrylic foam core delivers excellent stress relaxation under load.
- 3M
880.00
3M - AFT - GREY TAPE BLISTER PACKING - 25MM X 4M
5 out of 5
(1)
- Attachment Tape is a high performance acrylic foam tape used widely for a variety of exterior & interior application. Acrylic adhesive is formulated for interior and exterior trim attachment to automotive substrates. Conformable closed cell acrylic foam core delivers excellent stress relaxation under load.
- 3M
290.00
3M - AFT - GREY TAPE BLISTER PACKING - 12MM X 10M
5 out of 5
(1)
- Attachment Tape is a high performance acrylic foam tape used widely for a variety of exterior & interior application. Acrylic adhesive is formulated for interior and exterior trim attachment to automotive substrates. Conformable closed cell acrylic foam core delivers excellent stress relaxation under load.
- 3M
580.00
3M - AFT - GREY TAPE BLISTER PACKING - 25MM X 10M
5 out of 5
(1)
- Attachment Tape is a high performance acrylic foam tape used widely for a variety of exterior & interior application. Acrylic adhesive is formulated for interior and exterior trim attachment to automotive substrates. Conformable closed cell acrylic foam core delivers excellent stress relaxation under load.
- 3M
424.00
3M 91091 CLEAR TISSUE TAPE - 12MM X 50M
5 out of 5
(1)
- High performance 90 Micron double coated tissue tape made of conformable tissue carrier and high performance pressure sensitive acrylic adhesive provides excellent adhesion to a variety of surfaces. Excellent adhesion to high surface energy plastics.
- 3M
3M 4991 VHB Grey Tape - 18MM X 6.4M
5.00 out of 5
(1)
- 3Mâ„¢ VHBâ„¢ Tape is a high performance double-coated pressure sensitive acrylic foam tape. 3Mâ„¢ VHBâ„¢ Tapes have been used for many applications in the construction industry, including the manufacture of architectural panels for curtain walls and exterior building cladding. 3Mâ„¢ VHBâ„¢ Tapes are ideal for use in many exterior and interior architectural panel applications. In many situations, 3Mâ„¢ VHBâ„¢ Tapes can replace rivets, spot welds, liquid adhesives, and other permanent fasteners. Fast and easy-to-use permanent bonding method provides high strength and long-term durability. Eliminate drilling, grinding, refinishing, screwing, welding and associated clean-up. Pressure sensitive adhesive bonds on contact to provide immediate handling strength.
- Recommended application : Decorative material and trim Nameplates and logos Electronic displays Panel to frame Stiffener to panel
- 4991-VHB
- 3M
3M 4991 VHB Grey Tape - 25MM X 6.4M
5.00 out of 5
(1)
- 3Mâ„¢ VHBâ„¢ Tape is a high performance double-coated pressure sensitive acrylic foam tape. 3Mâ„¢ VHBâ„¢ Tapes have been used for many applications in the construction industry, including the manufacture of architectural panels for curtain walls and exterior building cladding. 3Mâ„¢ VHBâ„¢ Tapes are ideal for use in many exterior and interior architectural panel applications. In many situations, 3Mâ„¢ VHBâ„¢ Tapes can replace rivets, spot welds, liquid adhesives, and other permanent fasteners. Fast and easy-to-use permanent bonding method provides high strength and long-term durability. Eliminate drilling, grinding, refinishing, screwing, welding and associated clean-up. Pressure sensitive adhesive bonds on contact to provide immediate handling strength.
- Recommended application : Decorative material and trim Nameplates and logos Electronic displays Panel to frame Stiffener to panel
- 4991-VHB
- 3M
3M SGT VHB GREY TAPE - 12MM X 6.4M
5.00 out of 5
(1)
- 3M VHB Structural Glazing Tape is a double-coated 0.090 in (2.3 mm) pressure sensitive adhesive tape for bonding many painted metals, as well as unpainted metals, and higher surface energy plastics. 3M VHB Structural Glazing Tape is appropriate for applications, which demand a thicker conformable product.
- Each 3M™ VHB™ Structural Glazing Tape application will be reviewed on a project specific basis. Application guidelines will be based upon adhesion test results generated by 3M Technical Service. These project specific application guidelines will be provided to the customer and must be followed during the glass bonding process. Listed below are some typical application guidelines for a 3M™ VHB™ Structural Glazing Tape project. However, these do not replace the project specific application guidelines provided by the 3M Technical Service Representative. 1. For maximum bond strength, non-glass surfaces should be thoroughly cleaned with a 50/50 IPA/water mixture to remove contaminants. Glass surfaces should also be cleaned with a 50/50 IPA/water mixture followed by treatment of the glass with a mixture of an IPA/water/Silane solution prior to tape application. Contact 3M for further information on appropriate Silane mixtures. Some surfaces may require additional surface preparation that will be determined on a project specific basis by a 3M Technical Services Representative. 2. Ideal tape application is accomplished when temperature is between 21 °C and 38 °C and the bond is allowed to dwell 72 hours. Initial tape application to surfaces at temperatures below 16 °C is not recommended. However, the use of a primer may lower the minimum application temperature. Contact 3M for more information. 3. Bond strength is dependent upon the amount of adhesiveto-surface contact developed. Flat bonding surfaces and firm application pressure develops better adhesive contact and helps improve bond strength. Generally, this means that the tape should experience at least 100 kPa in roll down, vacuum or platen pressure. 3M must approve pressure application equipment for 3M™ VHB™ Structural Glazing Tape applications. 3. After final bonding of the parts, immediate handling strength is achieved and glazed units can be moved as there is no curing mechanism in this process. However, the bond strength will continue to increase as the adhesive flows onto the surface. At room temperature, approximately 50 % of the ultimate strength will be achieved in 10-20 minutes after pressure application, 90 % after 24 hours and 100 % after 72 hours. The use of a primer may accelerate the bond strength build rate. Contact 3M for more information.
- G23F
- 3M
3M SGT VHB GREY TAPE - 18MM X 6.4M
5.00 out of 5
(1)
- 3M VHB Structural Glazing Tape is a double-coated 0.090 in. (2.3 mm) pressure sensitive adhesive tape for bonding many painted metals, as well as unpainted metals, and higher surface energy plastics. 3M VHB Structural Glazing Tape is appropriate for applications, which demand a thicker conformable product.
- Each 3M™ VHB™ Structural Glazing Tape application will be reviewed on a project specific basis. Application guidelines will be based upon adhesion test results generated by 3M Technical Service. These project specific application guidelines will be provided to the customer and must be followed during the glass bonding process. Listed below are some typical application guidelines for a 3M™ VHB™ Structural Glazing Tape project. However, these do not replace the project specific application guidelines provided by the 3M Technical Service Representative. 1. For maximum bond strength, non-glass surfaces should be thoroughly cleaned with a 50/50 IPA/water mixture to remove contaminants. Glass surfaces should also be cleaned with a 50/50 IPA/water mixture followed by treatment of the glass with a mixture of an IPA/water/Silane solution prior to tape application. Contact 3M for further information on appropriate Silane mixtures. Some surfaces may require additional surface preparation that will be determined on a project specific basis by a 3M Technical Services Representative. 2. Ideal tape application is accomplished when temperature is between 21 °C and 38 °C and the bond is allowed to dwell 72 hours. Initial tape application to surfaces at temperatures below 16 °C is not recommended. However, the use of a primer may lower the minimum application temperature. Contact 3M for more information. 3. Bond strength is dependent upon the amount of adhesiveto-surface contact developed. Flat bonding surfaces and firm application pressure develops better adhesive contact and helps improve bond strength. Generally, this means that the tape should experience at least 100 kPa in roll down, vacuum or platen pressure. 3M must approve pressure application equipment for 3M™ VHB™ Structural Glazing Tape applications. 3. After final bonding of the parts, immediate handling strength is achieved and glazed units can be moved as there is no curing mechanism in this process. However, the bond strength will continue to increase as the adhesive flows onto the surface. At room temperature, approximately 50 % of the ultimate strength will be achieved in 10-20 minutes after pressure application, 90 % after 24 hours and 100 % after 72 hours. The use of a primer may accelerate the bond strength build rate. Contact 3M for more information.
- G23F
3M SGT VHB GREY TAPE - 25MM X 6.4M
5.00 out of 5
(1)
- 3M VHB Structural Glazing Tape is a double-coated 0.090 in. (2.3 mm) pressure sensitive adhesive tape for bonding many painted metals, as well as unpainted metals, and higher surface energy plastics. 3M VHB Structural Glazing Tape is appropriate for applications, which demand a thicker conformable product.
- Each 3M™ VHB™ Structural Glazing Tape application will be reviewed on a project specific basis. Application guidelines will be based upon adhesion test results generated by 3M Technical Service. These project specific application guidelines will be provided to the customer and must be followed during the glass bonding process. Listed below are some typical application guidelines for a 3M™ VHB™ Structural Glazing Tape project. However, these do not replace the project specific application guidelines provided by the 3M Technical Service Representative. 1. For maximum bond strength, non-glass surfaces should be thoroughly cleaned with a 50/50 IPA/water mixture to remove contaminants. Glass surfaces should also be cleaned with a 50/50 IPA/water mixture followed by treatment of the glass with a mixture of an IPA/water/Silane solution prior to tape application. Contact 3M for further information on appropriate Silane mixtures. Some surfaces may require additional surface preparation that will be determined on a project specific basis by a 3M Technical Services Representative. 2. Ideal tape application is accomplished when temperature is between 21 °C and 38 °C and the bond is allowed to dwell 72 hours. Initial tape application to surfaces at temperatures below 16 °C is not recommended. However, the use of a primer may lower the minimum application temperature. Contact 3M for more information. 3. Bond strength is dependent upon the amount of adhesiveto-surface contact developed. Flat bonding surfaces and firm application pressure develops better adhesive contact and helps improve bond strength. Generally, this means that the tape should experience at least 100 kPa in roll down, vacuum or platen pressure. 3M must approve pressure application equipment for 3M™ VHB™ Structural Glazing Tape applications. 3. After final bonding of the parts, immediate handling strength is achieved and glazed units can be moved as there is no curing mechanism in this process. However, the bond strength will continue to increase as the adhesive flows onto the surface. At room temperature, approximately 50 % of the ultimate strength will be achieved in 10-20 minutes after pressure application, 90 % after 24 hours and 100 % after 72 hours. The use of a primer may accelerate the bond strength build rate. Contact 3M for more information.
- SGT - VHB
3M - G23F - VHB BLACK TAPE - 12MM X 6.4M
5.00 out of 5
(1)
- 3M VHB Structural Glazing Tape is a double-coated 0.090 in. (2.3 mm) pressure sensitive adhesive tape for bonding many painted metals, as well as unpainted metals, and higher surface energy plastics. 3M VHB Structural Glazing Tape is appropriate for applications, which demand a thicker conformable product.
- Each 3M™ VHB™ Structural Glazing Tape application will be reviewed on a project specific basis. Application guidelines will be based upon adhesion test results generated by 3M Technical Service. These project specific application guidelines will be provided to the customer and must be followed during the glass bonding process. Listed below are some typical application guidelines for a 3M™ VHB™ Structural Glazing Tape project. However, these do not replace the project specific application guidelines provided by the 3M Technical Service Representative. 1. For maximum bond strength, non-glass surfaces should be thoroughly cleaned with a 50/50 IPA/water mixture to remove contaminants. Glass surfaces should also be cleaned with a 50/50 IPA/water mixture followed by treatment of the glass with a mixture of an IPA/water/Silane solution prior to tape application. Contact 3M for further information on appropriate Silane mixtures. Some surfaces may require additional surface preparation that will be determined on a project specific basis by a 3M Technical Services Representative. 2. Ideal tape application is accomplished when temperature is between 21 °C and 38 °C and the bond is allowed to dwell 72 hours. Initial tape application to surfaces at temperatures below 16 °C is not recommended. However, the use of a primer may lower the minimum application temperature. Contact 3M for more information. 3. Bond strength is dependent upon the amount of adhesiveto-surface contact developed. Flat bonding surfaces and firm application pressure develops better adhesive contact and helps improve bond strength. Generally, this means that the tape should experience at least 100 kPa in roll down, vacuum or platen pressure. 3M must approve pressure application equipment for 3M™ VHB™ Structural Glazing Tape applications. 3. After final bonding of the parts, immediate handling strength is achieved and glazed units can be moved as there is no curing mechanism in this process. However, the bond strength will continue to increase as the adhesive flows onto the surface. At room temperature, approximately 50 % of the ultimate strength will be achieved in 10-20 minutes after pressure application, 90 % after 24 hours and 100 % after 72 hours. The use of a primer may accelerate the bond strength build rate. Contact 3M for more information.
- G23F
3M - G23F - VHB BLACK TAPE - 18MM X 6.4M
5.00 out of 5
(1)
- 3M VHB Structural Glazing Tape is a double-coated 0.090 in. (2.3 mm) pressure sensitive adhesive tape for bonding many painted metals, as well as unpainted metals, and higher surface energy plastics. 3M VHB Structural Glazing Tape is appropriate for applications, which demand a thicker conformable product.
- "Each 3M™ VHB™ Structural Glazing Tape application will be reviewed on a project specific basis. Application guidelines will be based upon adhesion test results generated by 3M Technical Service. These project specific application guidelines will be provided to the customer and must be followed during the glass bonding process. Listed below are some typical application guidelines for a 3M™ VHB™ Structural Glazing Tape project. However, these do not replace the project specific application guidelines provided by the 3M Technical Service Representative. 1. For maximum bond strength, non-glass surfaces should be thoroughly cleaned with a 50/50 IPA/water mixture to remove contaminants. Glass surfaces should also be cleaned with a 50/50 IPA/water mixture followed by treatment of the glass with a mixture of an IPA/water/Silane solution prior to tape application. Contact 3M for further information on appropriate Silane mixtures. Some surfaces may require additional surface preparation that will be determined on a project specific basis by a 3M Technical Services Representative. 2. Ideal tape application is accomplished when temperature is between 21 °C and 38 °C and the bond is allowed to dwell 72 hours. Initial tape application to surfaces at temperatures below 16 °C is not recommended. However, the use of a primer may lower the minimum application temperature. Contact 3M for more information. 3. Bond strength is dependent upon the amount of adhesiveto-surface contact developed. Flat bonding surfaces and firm application pressure develops better adhesive contact and helps improve bond strength. Generally, this means that the tape should experience at least 100 kPa in roll down, vacuum or platen pressure. 3M must approve pressure application equipment for 3M™ VHB™ Structural Glazing Tape applications. 3. After final bonding of the parts, immediate handling strength is achieved and glazed units can be moved as there is no curing mechanism in this process. However, the bond strength will continue to increase as the adhesive flows onto the surface. At room temperature, approximately 50 % of the ultimate strength will be achieved in 10-20 minutes after pressure application, 90 % after 24 hours and 100 % after 72 hours. The use of a primer may accelerate the bond strength build rate. Contact 3M for more information. "
- G23F
3M - G23F - VHB GREY TAPE - 25MM X 6.4M
5.00 out of 5
(1)
- 3M VHB Structural Glazing Tape is a double-coated 0.090 in (2.3 mm) pressure sensitive adhesive tape for bonding many painted metals, as well as unpainted metals, and higher surface energy plastics. 3M VHB Structural Glazing Tape is appropriate for applications, which demand a thicker conformable product. Highly engineered acrylic adhesive provides long term durability, but removes cleanly after harsh masking applications. Creates a permanent seal against water, moisture and more. Pressure sensitive adhesive bonds on contact to provide immediate handling strength.
- "Each 3M™ VHB™ Structural Glazing Tape application will be reviewed on a project specific basis. Application guidelines will be based upon adhesion test results generated by 3M Technical Service. These project specific application guidelines will be provided to the customer and must be followed during the glass bonding process. Listed below are some typical application guidelines for a 3M™ VHB™ Structural Glazing Tape project. However, these do not replace the project specific application guidelines provided by the 3M Technical Service Representative. 1. For maximum bond strength, non-glass surfaces should be thoroughly cleaned with a 50/50 IPA/water mixture to remove contaminants. Glass surfaces should also be cleaned with a 50/50 IPA/water mixture followed by treatment of the glass with a mixture of an IPA/water/Silane solution prior to tape application. Contact 3M for further information on appropriate Silane mixtures. Some surfaces may require additional surface preparation that will be determined on a project specific basis by a 3M Technical Services Representative. 2. Ideal tape application is accomplished when temperature is between 21 °C and 38 °C and the bond is allowed to dwell 72 hours. Initial tape application to surfaces at temperatures below 16 °C is not recommended. However, the use of a primer may lower the minimum application temperature. Contact 3M for more information. 3. Bond strength is dependent upon the amount of adhesiveto-surface contact developed. Flat bonding surfaces and firm application pressure develops better adhesive contact and helps improve bond strength. Generally, this means that the tape should experience at least 100 kPa in roll down, vacuum or platen pressure. 3M must approve pressure application equipment for 3M™ VHB™ Structural Glazing Tape applications. 3. After final bonding of the parts, immediate handling strength is achieved and glazed units can be moved as there is no curing mechanism in this process. However, the bond strength will continue to increase as the adhesive flows onto the surface. At room temperature, approximately 50 % of the ultimate strength will be achieved in 10-20 minutes after pressure application, 90 % after 24 hours and 100 % after 72 hours. The use of a primer may accelerate the bond strength build rate. Contact 3M for more information. "
- G23F
- 3M
3M - G11F - VHB GREY TAPE - 12MM X 8.22M
5.00 out of 5
(1)
- 3Mâ„¢ VHBâ„¢ Tape is a high performance double-coated pressure sensitive acrylic foam tape. 3Mâ„¢ VHBâ„¢ Tapes have been used for many applications in the construction industry, including the manufacture of architectural panels for curtain walls and exterior building cladding. 3Mâ„¢ VHBâ„¢ Tapes are ideal for use in many exterior and interior architectural panel applications. In many situations, 3Mâ„¢ VHBâ„¢ Tapes can replace rivets, spot welds, liquid adhesives, and other permanent fasteners.
- Each 3M™ VHB™ Structural Glazing Tape application will be reviewed on a project specific basis. Application guidelines will be based upon adhesion test results generated by 3M Technical Service. These project specific application guidelines will be provided to the customer and must be followed during the glass bonding process. Listed below are some typical application guidelines for a 3M™ VHB™ Structural Glazing Tape project. However, these do not replace the project specific application guidelines provided by the 3M Technical Service Representative. 1. For maximum bond strength, non-glass surfaces should be thoroughly cleaned with a 50/50 IPA/water mixture to remove contaminants. Glass surfaces should also be cleaned with a 50/50 IPA/water mixture followed by treatment of the glass with a mixture of an IPA/water/Silane solution prior to tape application. Contact 3M for further information on appropriate Silane mixtures. Some surfaces may require additional surface preparation that will be determined on a project specific basis by a 3M Technical Services Representative. 2. Ideal tape application is accomplished when temperature is between 21 °C and 38 °C and the bond is allowed to dwell 72 hours. Initial tape application to surfaces at temperatures below 16 °C is not recommended. However, the use of a primer may lower the minimum application temperature. Contact 3M for more information. 3. Bond strength is dependent upon the amount of adhesiveto-surface contact developed. Flat bonding surfaces and firm application pressure develops better adhesive contact and helps improve bond strength. Generally, this means that the tape should experience at least 100 kPa in roll down, vacuum or platen pressure. 3M must approve pressure application equipment for 3M™ VHB™ Structural Glazing Tape applications. 3. After final bonding of the parts, immediate handling strength is achieved and glazed units can be moved as there is no curing mechanism in this process. However, the bond strength will continue to increase as the adhesive flows onto the surface. At room temperature, approximately 50 % of the ultimate strength will be achieved in 10-20 minutes after pressure application, 90 % after 24 hours and 100 % after 72 hours. The use of a primer may accelerate the bond strength build rate. Contact 3M for more information.
- G11F
3M - G11F - VHB GREY TAPE - 18MM X 8.22M
5.00 out of 5
(1)
- 3Mâ„¢ VHBâ„¢ Tape is a high performance double-coated pressure sensitive acrylic foam tape. 3Mâ„¢ VHBâ„¢ Tapes have been used for many applications in the construction industry, including the manufacture of architectural panels for curtain walls and exterior building cladding. 3Mâ„¢ VHBâ„¢ Tapes are ideal for use in many exterior and interior architectural panel applications. In many situations, 3Mâ„¢ VHBâ„¢ Tapes can replace rivets, spot welds, liquid adhesives, and other permanent fasteners.
- Each 3M™ VHB™ Structural Glazing Tape application will be reviewed on a project specific basis. Application guidelines will be based upon adhesion test results generated by 3M Technical Service. These project specific application guidelines will be provided to the customer and must be followed during the glass bonding process. Listed below are some typical application guidelines for a 3M™ VHB™ Structural Glazing Tape project. However, these do not replace the project specific application guidelines provided by the 3M Technical Service Representative. 1. For maximum bond strength, non-glass surfaces should be thoroughly cleaned with a 50/50 IPA/water mixture to remove contaminants. Glass surfaces should also be cleaned with a 50/50 IPA/water mixture followed by treatment of the glass with a mixture of an IPA/water/Silane solution prior to tape application. Contact 3M for further information on appropriate Silane mixtures. Some surfaces may require additional surface preparation that will be determined on a project specific basis by a 3M Technical Services Representative. 2. Ideal tape application is accomplished when temperature is between 21 °C and 38 °C and the bond is allowed to dwell 72 hours. Initial tape application to surfaces at temperatures below 16 °C is not recommended. However, the use of a primer may lower the minimum application temperature. Contact 3M for more information. 3. Bond strength is dependent upon the amount of adhesiveto-surface contact developed. Flat bonding surfaces and firm application pressure develops better adhesive contact and helps improve bond strength. Generally, this means that the tape should experience at least 100 kPa in roll down, vacuum or platen pressure. 3M must approve pressure application equipment for 3M™ VHB™ Structural Glazing Tape applications. 3. After final bonding of the parts, immediate handling strength is achieved and glazed units can be moved as there is no curing mechanism in this process. However, the bond strength will continue to increase as the adhesive flows onto the surface. At room temperature, approximately 50 % of the ultimate strength will be achieved in 10-20 minutes after pressure application, 90 % after 24 hours and 100 % after 72 hours. The use of a primer may accelerate the bond strength build rate. Contact 3M for more information.
- G11F
3M - G11F - VHB GREY TAPE - 25MM X 8.22M
5.00 out of 5
(1)
- 3Mâ„¢ VHBâ„¢ Tape is a high performance double-coated pressure sensitive acrylic foam tape. 3Mâ„¢ VHBâ„¢ Tapes have been used for many applications in the construction industry, including the manufacture of architectural panels for curtain walls and exterior building cladding. 3Mâ„¢ VHBâ„¢ Tapes are ideal for use in many exterior and interior architectural panel applications. In many situations, 3Mâ„¢ VHBâ„¢ Tapes can replace rivets, spot welds, liquid adhesives, and other permanent fasteners. Fast and easy-to-use permanent bonding method provides high strength and long-term durability. Creates a permanent seal against water, moisture and more. Allows the use of thinner, lighter weight and dissimilar materials.
- Recommended Applications : Architectural panels for curtain walls Exterior building cladding Interior panel and trim attachment
- G11F
- 3M
3M - 4941 - VHB Grey Tape 12mm x 8.22m
5.00 out of 5
(1)
- 3Mâ„¢ VHBâ„¢ Tape 4941. It is a grey, 0.045 in (1.1 mm), multi-purpose acrylic adhesive with a conformable, foam core. It can replace rivets, welds and screws. The fast and easy to use permanent bonding method provides high strength and long-term durability. It offers design flexibility with its viscoelasticity and powerful ability to bond to a variety of surfaces. Fast and easy-to-use permanent bonding method provides high strength and long-term durability. Eliminate drilling, grinding, refinishing, screwing, welding and associated clean-up. Pressure sensitive adhesive bonds on contact to provide immediate handling strength.
- 4941 VHB
- 3M
3M - 4941 - VHB Grey Tape 18mm x 8.22m
5.00 out of 5
(1)
- 3Mâ„¢ VHBâ„¢ Tape 4941. It is a grey, 0.045 in (1.1 mm), multi-purpose acrylic adhesive with a conformable, foam core. It can replace rivets, welds and screws. The fast and easy to use permanent bonding method provides high strength and long-term durability. It offers design flexibility with its viscoelasticity and powerful ability to bond to a variety of surfaces. Fast and easy-to-use permanent bonding method provides high strength and long-term durability. Eliminate drilling, grinding, refinishing, screwing, welding and associated clean-up. Pressure sensitive adhesive bonds on contact to provide immediate handling strength.
- 4941 VHB
- 3M
3M - 4941 - VHB Grey Tape 25mm x 8.22m
5.00 out of 5
(1)
- 3Mâ„¢ VHBâ„¢ Tape 4941. It is a grey, 0.045 in (1.1 mm), multi-purpose acrylic adhesive with a conformable, foam core. It can replace rivets, welds and screws. The fast and easy to use permanent bonding method provides high strength and long-term durability. It offers design flexibility with its viscoelasticity and powerful ability to bond to a variety of surfaces. Fast and easy-to-use permanent bonding method provides high strength and long-term durability. Eliminate drilling, grinding, refinishing, screwing, welding and associated clean-up. Pressure sensitive adhesive bonds on contact to provide immediate handling strength.
- 4941 VHB
- 3M
3M - 4941 - VHB Grey Tape 584.22mm x 8.22m
5.00 out of 5
(1)
- 3Mâ„¢ VHBâ„¢ Tape 4941. It is a grey, 0.045 in (1.1 mm), multi-purpose acrylic adhesive with a conformable, foam core. It can replace rivets, welds and screws. The fast and easy to use permanent bonding method provides high strength and long-term durability. It offers design flexibility with its viscoelasticity and powerful ability to bond to a variety of surfaces. Fast and easy-to-use permanent bonding method provides high strength and long-term durability. Eliminate drilling, grinding, refinishing, screwing, welding and associated clean-up. Pressure sensitive adhesive bonds on contact to provide immediate handling strength.
- 4941 VHB
- 3M
3M - AFT - GREY TAPE BLISTER PACKING - 12MM X 4M
5.00 out of 5
(1)
- Attachment Tape is a high performance acrylic foam tape used widely for a variety of exterior & interior application. Acrylic adhesive is formulated for interior and exterior trim attachment to automotive substrates. Conformable closed cell acrylic foam core delivers excellent stress relaxation under load.
- AFT
- 3M
3M - AFT - GREY TAPE BLISTER PACKING - 25MM X 4M
5.00 out of 5
(1)
- Attachment Tape is a high performance acrylic foam tape used widely for a variety of exterior & interior application. Acrylic adhesive is formulated for interior and exterior trim attachment to automotive substrates. Conformable closed cell acrylic foam core delivers excellent stress relaxation under load.
- AFT
- 3M
3M - AFT - GREY TAPE BLISTER PACKING - 12MM X 10M
5.00 out of 5
(1)
- Attachment Tape is a high performance acrylic foam tape used widely for a variety of exterior & interior application. Acrylic adhesive is formulated for interior and exterior trim attachment to automotive substrates. Conformable closed cell acrylic foam core delivers excellent stress relaxation under load.
- Recommended Applications : Body side moldings, Weatherstrips, Bumper, roof and window moldings, Emblems, Door edge moldings, End rubber and pad protectors, Mud guards, Side visors
- AFT 3M Attachment Tape is a high-performance acrylic foam tape used widely for a variety of interior and exterior applications in the Automotive Professional Market.
- 3M
3M - AFT - GREY TAPE BLISTER PACKING - 25MM X 10M
5.00 out of 5
(1)
- Attachment Tape is a high performance acrylic foam tape used widely for a variety of exterior & interior application. Acrylic adhesive is formulated for interior and exterior trim attachment to automotive substrates. Conformable closed cell acrylic foam core delivers excellent stress relaxation under load.
- AFT
- 3M
3M 91091 CLEAR TISSUE TAPE - 12MM X 50M
5.00 out of 5
(1)
- High performance 90 Micron double coated tissue tape made of conformable tissue carrier and high performance pressure sensitive acrylic adhesive provides excellent adhesion to a variety of surfaces. Excellent adhesion to high surface energy plastics.
- Application ideas include attaching trims, labels, lining, fabric, web splicing, core starting and end tabbing.
- 91091 -tissue
- 3M
3M 4991 VHB Grey Tape - 18MM X 6.4M
5.00 out of 5
(1)
- 3Mâ„¢ VHBâ„¢ Tape is a high performance double-coated pressure sensitive acrylic foam tape. 3Mâ„¢ VHBâ„¢ Tapes have been used for many applications in the construction industry, including the manufacture of architectural panels for curtain walls and exterior building cladding. 3Mâ„¢ VHBâ„¢ Tapes are ideal for use in many exterior and interior architectural panel applications. In many situations, 3Mâ„¢ VHBâ„¢ Tapes can replace rivets, spot welds, liquid adhesives, and other permanent fasteners. Fast and easy-to-use permanent bonding method provides high strength and long-term durability. Eliminate drilling, grinding, refinishing, screwing, welding and associated clean-up. Pressure sensitive adhesive bonds on contact to provide immediate handling strength.
- Recommended application : Decorative material and trim Nameplates and logos Electronic displays Panel to frame Stiffener to panel
- 4991-VHB
- 3M
3M 4991 VHB Grey Tape - 25MM X 6.4M
5.00 out of 5
(1)
- 3Mâ„¢ VHBâ„¢ Tape is a high performance double-coated pressure sensitive acrylic foam tape. 3Mâ„¢ VHBâ„¢ Tapes have been used for many applications in the construction industry, including the manufacture of architectural panels for curtain walls and exterior building cladding. 3Mâ„¢ VHBâ„¢ Tapes are ideal for use in many exterior and interior architectural panel applications. In many situations, 3Mâ„¢ VHBâ„¢ Tapes can replace rivets, spot welds, liquid adhesives, and other permanent fasteners. Fast and easy-to-use permanent bonding method provides high strength and long-term durability. Eliminate drilling, grinding, refinishing, screwing, welding and associated clean-up. Pressure sensitive adhesive bonds on contact to provide immediate handling strength.
- Recommended application : Decorative material and trim Nameplates and logos Electronic displays Panel to frame Stiffener to panel
- 4991-VHB
- 3M
3M SGT VHB GREY TAPE - 12MM X 6.4M
5.00 out of 5
(1)
- 3M VHB Structural Glazing Tape is a double-coated 0.090 in (2.3 mm) pressure sensitive adhesive tape for bonding many painted metals, as well as unpainted metals, and higher surface energy plastics. 3M VHB Structural Glazing Tape is appropriate for applications, which demand a thicker conformable product.
- Each 3M™ VHB™ Structural Glazing Tape application will be reviewed on a project specific basis. Application guidelines will be based upon adhesion test results generated by 3M Technical Service. These project specific application guidelines will be provided to the customer and must be followed during the glass bonding process. Listed below are some typical application guidelines for a 3M™ VHB™ Structural Glazing Tape project. However, these do not replace the project specific application guidelines provided by the 3M Technical Service Representative. 1. For maximum bond strength, non-glass surfaces should be thoroughly cleaned with a 50/50 IPA/water mixture to remove contaminants. Glass surfaces should also be cleaned with a 50/50 IPA/water mixture followed by treatment of the glass with a mixture of an IPA/water/Silane solution prior to tape application. Contact 3M for further information on appropriate Silane mixtures. Some surfaces may require additional surface preparation that will be determined on a project specific basis by a 3M Technical Services Representative. 2. Ideal tape application is accomplished when temperature is between 21 °C and 38 °C and the bond is allowed to dwell 72 hours. Initial tape application to surfaces at temperatures below 16 °C is not recommended. However, the use of a primer may lower the minimum application temperature. Contact 3M for more information. 3. Bond strength is dependent upon the amount of adhesiveto-surface contact developed. Flat bonding surfaces and firm application pressure develops better adhesive contact and helps improve bond strength. Generally, this means that the tape should experience at least 100 kPa in roll down, vacuum or platen pressure. 3M must approve pressure application equipment for 3M™ VHB™ Structural Glazing Tape applications. 3. After final bonding of the parts, immediate handling strength is achieved and glazed units can be moved as there is no curing mechanism in this process. However, the bond strength will continue to increase as the adhesive flows onto the surface. At room temperature, approximately 50 % of the ultimate strength will be achieved in 10-20 minutes after pressure application, 90 % after 24 hours and 100 % after 72 hours. The use of a primer may accelerate the bond strength build rate. Contact 3M for more information.
- G23F
- 3M
3M SGT VHB GREY TAPE - 18MM X 6.4M
5.00 out of 5
(1)
- 3M VHB Structural Glazing Tape is a double-coated 0.090 in. (2.3 mm) pressure sensitive adhesive tape for bonding many painted metals, as well as unpainted metals, and higher surface energy plastics. 3M VHB Structural Glazing Tape is appropriate for applications, which demand a thicker conformable product.
- Each 3M™ VHB™ Structural Glazing Tape application will be reviewed on a project specific basis. Application guidelines will be based upon adhesion test results generated by 3M Technical Service. These project specific application guidelines will be provided to the customer and must be followed during the glass bonding process. Listed below are some typical application guidelines for a 3M™ VHB™ Structural Glazing Tape project. However, these do not replace the project specific application guidelines provided by the 3M Technical Service Representative. 1. For maximum bond strength, non-glass surfaces should be thoroughly cleaned with a 50/50 IPA/water mixture to remove contaminants. Glass surfaces should also be cleaned with a 50/50 IPA/water mixture followed by treatment of the glass with a mixture of an IPA/water/Silane solution prior to tape application. Contact 3M for further information on appropriate Silane mixtures. Some surfaces may require additional surface preparation that will be determined on a project specific basis by a 3M Technical Services Representative. 2. Ideal tape application is accomplished when temperature is between 21 °C and 38 °C and the bond is allowed to dwell 72 hours. Initial tape application to surfaces at temperatures below 16 °C is not recommended. However, the use of a primer may lower the minimum application temperature. Contact 3M for more information. 3. Bond strength is dependent upon the amount of adhesiveto-surface contact developed. Flat bonding surfaces and firm application pressure develops better adhesive contact and helps improve bond strength. Generally, this means that the tape should experience at least 100 kPa in roll down, vacuum or platen pressure. 3M must approve pressure application equipment for 3M™ VHB™ Structural Glazing Tape applications. 3. After final bonding of the parts, immediate handling strength is achieved and glazed units can be moved as there is no curing mechanism in this process. However, the bond strength will continue to increase as the adhesive flows onto the surface. At room temperature, approximately 50 % of the ultimate strength will be achieved in 10-20 minutes after pressure application, 90 % after 24 hours and 100 % after 72 hours. The use of a primer may accelerate the bond strength build rate. Contact 3M for more information.
- G23F
3M SGT VHB GREY TAPE - 25MM X 6.4M
5.00 out of 5
(1)
- 3M VHB Structural Glazing Tape is a double-coated 0.090 in. (2.3 mm) pressure sensitive adhesive tape for bonding many painted metals, as well as unpainted metals, and higher surface energy plastics. 3M VHB Structural Glazing Tape is appropriate for applications, which demand a thicker conformable product.
- Each 3M™ VHB™ Structural Glazing Tape application will be reviewed on a project specific basis. Application guidelines will be based upon adhesion test results generated by 3M Technical Service. These project specific application guidelines will be provided to the customer and must be followed during the glass bonding process. Listed below are some typical application guidelines for a 3M™ VHB™ Structural Glazing Tape project. However, these do not replace the project specific application guidelines provided by the 3M Technical Service Representative. 1. For maximum bond strength, non-glass surfaces should be thoroughly cleaned with a 50/50 IPA/water mixture to remove contaminants. Glass surfaces should also be cleaned with a 50/50 IPA/water mixture followed by treatment of the glass with a mixture of an IPA/water/Silane solution prior to tape application. Contact 3M for further information on appropriate Silane mixtures. Some surfaces may require additional surface preparation that will be determined on a project specific basis by a 3M Technical Services Representative. 2. Ideal tape application is accomplished when temperature is between 21 °C and 38 °C and the bond is allowed to dwell 72 hours. Initial tape application to surfaces at temperatures below 16 °C is not recommended. However, the use of a primer may lower the minimum application temperature. Contact 3M for more information. 3. Bond strength is dependent upon the amount of adhesiveto-surface contact developed. Flat bonding surfaces and firm application pressure develops better adhesive contact and helps improve bond strength. Generally, this means that the tape should experience at least 100 kPa in roll down, vacuum or platen pressure. 3M must approve pressure application equipment for 3M™ VHB™ Structural Glazing Tape applications. 3. After final bonding of the parts, immediate handling strength is achieved and glazed units can be moved as there is no curing mechanism in this process. However, the bond strength will continue to increase as the adhesive flows onto the surface. At room temperature, approximately 50 % of the ultimate strength will be achieved in 10-20 minutes after pressure application, 90 % after 24 hours and 100 % after 72 hours. The use of a primer may accelerate the bond strength build rate. Contact 3M for more information.
- SGT - VHB
3M - G23F - VHB BLACK TAPE - 12MM X 6.4M
5.00 out of 5
(1)
- 3M VHB Structural Glazing Tape is a double-coated 0.090 in. (2.3 mm) pressure sensitive adhesive tape for bonding many painted metals, as well as unpainted metals, and higher surface energy plastics. 3M VHB Structural Glazing Tape is appropriate for applications, which demand a thicker conformable product.
- Each 3M™ VHB™ Structural Glazing Tape application will be reviewed on a project specific basis. Application guidelines will be based upon adhesion test results generated by 3M Technical Service. These project specific application guidelines will be provided to the customer and must be followed during the glass bonding process. Listed below are some typical application guidelines for a 3M™ VHB™ Structural Glazing Tape project. However, these do not replace the project specific application guidelines provided by the 3M Technical Service Representative. 1. For maximum bond strength, non-glass surfaces should be thoroughly cleaned with a 50/50 IPA/water mixture to remove contaminants. Glass surfaces should also be cleaned with a 50/50 IPA/water mixture followed by treatment of the glass with a mixture of an IPA/water/Silane solution prior to tape application. Contact 3M for further information on appropriate Silane mixtures. Some surfaces may require additional surface preparation that will be determined on a project specific basis by a 3M Technical Services Representative. 2. Ideal tape application is accomplished when temperature is between 21 °C and 38 °C and the bond is allowed to dwell 72 hours. Initial tape application to surfaces at temperatures below 16 °C is not recommended. However, the use of a primer may lower the minimum application temperature. Contact 3M for more information. 3. Bond strength is dependent upon the amount of adhesiveto-surface contact developed. Flat bonding surfaces and firm application pressure develops better adhesive contact and helps improve bond strength. Generally, this means that the tape should experience at least 100 kPa in roll down, vacuum or platen pressure. 3M must approve pressure application equipment for 3M™ VHB™ Structural Glazing Tape applications. 3. After final bonding of the parts, immediate handling strength is achieved and glazed units can be moved as there is no curing mechanism in this process. However, the bond strength will continue to increase as the adhesive flows onto the surface. At room temperature, approximately 50 % of the ultimate strength will be achieved in 10-20 minutes after pressure application, 90 % after 24 hours and 100 % after 72 hours. The use of a primer may accelerate the bond strength build rate. Contact 3M for more information.
- G23F
3M - G23F - VHB BLACK TAPE - 18MM X 6.4M
5.00 out of 5
(1)
- 3M VHB Structural Glazing Tape is a double-coated 0.090 in. (2.3 mm) pressure sensitive adhesive tape for bonding many painted metals, as well as unpainted metals, and higher surface energy plastics. 3M VHB Structural Glazing Tape is appropriate for applications, which demand a thicker conformable product.
- "Each 3M™ VHB™ Structural Glazing Tape application will be reviewed on a project specific basis. Application guidelines will be based upon adhesion test results generated by 3M Technical Service. These project specific application guidelines will be provided to the customer and must be followed during the glass bonding process. Listed below are some typical application guidelines for a 3M™ VHB™ Structural Glazing Tape project. However, these do not replace the project specific application guidelines provided by the 3M Technical Service Representative. 1. For maximum bond strength, non-glass surfaces should be thoroughly cleaned with a 50/50 IPA/water mixture to remove contaminants. Glass surfaces should also be cleaned with a 50/50 IPA/water mixture followed by treatment of the glass with a mixture of an IPA/water/Silane solution prior to tape application. Contact 3M for further information on appropriate Silane mixtures. Some surfaces may require additional surface preparation that will be determined on a project specific basis by a 3M Technical Services Representative. 2. Ideal tape application is accomplished when temperature is between 21 °C and 38 °C and the bond is allowed to dwell 72 hours. Initial tape application to surfaces at temperatures below 16 °C is not recommended. However, the use of a primer may lower the minimum application temperature. Contact 3M for more information. 3. Bond strength is dependent upon the amount of adhesiveto-surface contact developed. Flat bonding surfaces and firm application pressure develops better adhesive contact and helps improve bond strength. Generally, this means that the tape should experience at least 100 kPa in roll down, vacuum or platen pressure. 3M must approve pressure application equipment for 3M™ VHB™ Structural Glazing Tape applications. 3. After final bonding of the parts, immediate handling strength is achieved and glazed units can be moved as there is no curing mechanism in this process. However, the bond strength will continue to increase as the adhesive flows onto the surface. At room temperature, approximately 50 % of the ultimate strength will be achieved in 10-20 minutes after pressure application, 90 % after 24 hours and 100 % after 72 hours. The use of a primer may accelerate the bond strength build rate. Contact 3M for more information. "
- G23F
3M - G23F - VHB GREY TAPE - 25MM X 6.4M
5.00 out of 5
(1)
- 3M VHB Structural Glazing Tape is a double-coated 0.090 in (2.3 mm) pressure sensitive adhesive tape for bonding many painted metals, as well as unpainted metals, and higher surface energy plastics. 3M VHB Structural Glazing Tape is appropriate for applications, which demand a thicker conformable product. Highly engineered acrylic adhesive provides long term durability, but removes cleanly after harsh masking applications. Creates a permanent seal against water, moisture and more. Pressure sensitive adhesive bonds on contact to provide immediate handling strength.
- "Each 3M™ VHB™ Structural Glazing Tape application will be reviewed on a project specific basis. Application guidelines will be based upon adhesion test results generated by 3M Technical Service. These project specific application guidelines will be provided to the customer and must be followed during the glass bonding process. Listed below are some typical application guidelines for a 3M™ VHB™ Structural Glazing Tape project. However, these do not replace the project specific application guidelines provided by the 3M Technical Service Representative. 1. For maximum bond strength, non-glass surfaces should be thoroughly cleaned with a 50/50 IPA/water mixture to remove contaminants. Glass surfaces should also be cleaned with a 50/50 IPA/water mixture followed by treatment of the glass with a mixture of an IPA/water/Silane solution prior to tape application. Contact 3M for further information on appropriate Silane mixtures. Some surfaces may require additional surface preparation that will be determined on a project specific basis by a 3M Technical Services Representative. 2. Ideal tape application is accomplished when temperature is between 21 °C and 38 °C and the bond is allowed to dwell 72 hours. Initial tape application to surfaces at temperatures below 16 °C is not recommended. However, the use of a primer may lower the minimum application temperature. Contact 3M for more information. 3. Bond strength is dependent upon the amount of adhesiveto-surface contact developed. Flat bonding surfaces and firm application pressure develops better adhesive contact and helps improve bond strength. Generally, this means that the tape should experience at least 100 kPa in roll down, vacuum or platen pressure. 3M must approve pressure application equipment for 3M™ VHB™ Structural Glazing Tape applications. 3. After final bonding of the parts, immediate handling strength is achieved and glazed units can be moved as there is no curing mechanism in this process. However, the bond strength will continue to increase as the adhesive flows onto the surface. At room temperature, approximately 50 % of the ultimate strength will be achieved in 10-20 minutes after pressure application, 90 % after 24 hours and 100 % after 72 hours. The use of a primer may accelerate the bond strength build rate. Contact 3M for more information. "
- G23F
- 3M
3M - G11F - VHB GREY TAPE - 12MM X 8.22M
5.00 out of 5
(1)
- 3Mâ„¢ VHBâ„¢ Tape is a high performance double-coated pressure sensitive acrylic foam tape. 3Mâ„¢ VHBâ„¢ Tapes have been used for many applications in the construction industry, including the manufacture of architectural panels for curtain walls and exterior building cladding. 3Mâ„¢ VHBâ„¢ Tapes are ideal for use in many exterior and interior architectural panel applications. In many situations, 3Mâ„¢ VHBâ„¢ Tapes can replace rivets, spot welds, liquid adhesives, and other permanent fasteners.
- Each 3M™ VHB™ Structural Glazing Tape application will be reviewed on a project specific basis. Application guidelines will be based upon adhesion test results generated by 3M Technical Service. These project specific application guidelines will be provided to the customer and must be followed during the glass bonding process. Listed below are some typical application guidelines for a 3M™ VHB™ Structural Glazing Tape project. However, these do not replace the project specific application guidelines provided by the 3M Technical Service Representative. 1. For maximum bond strength, non-glass surfaces should be thoroughly cleaned with a 50/50 IPA/water mixture to remove contaminants. Glass surfaces should also be cleaned with a 50/50 IPA/water mixture followed by treatment of the glass with a mixture of an IPA/water/Silane solution prior to tape application. Contact 3M for further information on appropriate Silane mixtures. Some surfaces may require additional surface preparation that will be determined on a project specific basis by a 3M Technical Services Representative. 2. Ideal tape application is accomplished when temperature is between 21 °C and 38 °C and the bond is allowed to dwell 72 hours. Initial tape application to surfaces at temperatures below 16 °C is not recommended. However, the use of a primer may lower the minimum application temperature. Contact 3M for more information. 3. Bond strength is dependent upon the amount of adhesiveto-surface contact developed. Flat bonding surfaces and firm application pressure develops better adhesive contact and helps improve bond strength. Generally, this means that the tape should experience at least 100 kPa in roll down, vacuum or platen pressure. 3M must approve pressure application equipment for 3M™ VHB™ Structural Glazing Tape applications. 3. After final bonding of the parts, immediate handling strength is achieved and glazed units can be moved as there is no curing mechanism in this process. However, the bond strength will continue to increase as the adhesive flows onto the surface. At room temperature, approximately 50 % of the ultimate strength will be achieved in 10-20 minutes after pressure application, 90 % after 24 hours and 100 % after 72 hours. The use of a primer may accelerate the bond strength build rate. Contact 3M for more information.
- G11F
3M - G11F - VHB GREY TAPE - 18MM X 8.22M
5.00 out of 5
(1)
- 3Mâ„¢ VHBâ„¢ Tape is a high performance double-coated pressure sensitive acrylic foam tape. 3Mâ„¢ VHBâ„¢ Tapes have been used for many applications in the construction industry, including the manufacture of architectural panels for curtain walls and exterior building cladding. 3Mâ„¢ VHBâ„¢ Tapes are ideal for use in many exterior and interior architectural panel applications. In many situations, 3Mâ„¢ VHBâ„¢ Tapes can replace rivets, spot welds, liquid adhesives, and other permanent fasteners.
- Each 3M™ VHB™ Structural Glazing Tape application will be reviewed on a project specific basis. Application guidelines will be based upon adhesion test results generated by 3M Technical Service. These project specific application guidelines will be provided to the customer and must be followed during the glass bonding process. Listed below are some typical application guidelines for a 3M™ VHB™ Structural Glazing Tape project. However, these do not replace the project specific application guidelines provided by the 3M Technical Service Representative. 1. For maximum bond strength, non-glass surfaces should be thoroughly cleaned with a 50/50 IPA/water mixture to remove contaminants. Glass surfaces should also be cleaned with a 50/50 IPA/water mixture followed by treatment of the glass with a mixture of an IPA/water/Silane solution prior to tape application. Contact 3M for further information on appropriate Silane mixtures. Some surfaces may require additional surface preparation that will be determined on a project specific basis by a 3M Technical Services Representative. 2. Ideal tape application is accomplished when temperature is between 21 °C and 38 °C and the bond is allowed to dwell 72 hours. Initial tape application to surfaces at temperatures below 16 °C is not recommended. However, the use of a primer may lower the minimum application temperature. Contact 3M for more information. 3. Bond strength is dependent upon the amount of adhesiveto-surface contact developed. Flat bonding surfaces and firm application pressure develops better adhesive contact and helps improve bond strength. Generally, this means that the tape should experience at least 100 kPa in roll down, vacuum or platen pressure. 3M must approve pressure application equipment for 3M™ VHB™ Structural Glazing Tape applications. 3. After final bonding of the parts, immediate handling strength is achieved and glazed units can be moved as there is no curing mechanism in this process. However, the bond strength will continue to increase as the adhesive flows onto the surface. At room temperature, approximately 50 % of the ultimate strength will be achieved in 10-20 minutes after pressure application, 90 % after 24 hours and 100 % after 72 hours. The use of a primer may accelerate the bond strength build rate. Contact 3M for more information.
- G11F
3M - G11F - VHB GREY TAPE - 25MM X 8.22M
5.00 out of 5
(1)
- 3Mâ„¢ VHBâ„¢ Tape is a high performance double-coated pressure sensitive acrylic foam tape. 3Mâ„¢ VHBâ„¢ Tapes have been used for many applications in the construction industry, including the manufacture of architectural panels for curtain walls and exterior building cladding. 3Mâ„¢ VHBâ„¢ Tapes are ideal for use in many exterior and interior architectural panel applications. In many situations, 3Mâ„¢ VHBâ„¢ Tapes can replace rivets, spot welds, liquid adhesives, and other permanent fasteners. Fast and easy-to-use permanent bonding method provides high strength and long-term durability. Creates a permanent seal against water, moisture and more. Allows the use of thinner, lighter weight and dissimilar materials.
- Recommended Applications : Architectural panels for curtain walls Exterior building cladding Interior panel and trim attachment
- G11F
- 3M
3M - 4941 - VHB Grey Tape 12mm x 8.22m
5.00 out of 5
(1)
- 3Mâ„¢ VHBâ„¢ Tape 4941. It is a grey, 0.045 in (1.1 mm), multi-purpose acrylic adhesive with a conformable, foam core. It can replace rivets, welds and screws. The fast and easy to use permanent bonding method provides high strength and long-term durability. It offers design flexibility with its viscoelasticity and powerful ability to bond to a variety of surfaces. Fast and easy-to-use permanent bonding method provides high strength and long-term durability. Eliminate drilling, grinding, refinishing, screwing, welding and associated clean-up. Pressure sensitive adhesive bonds on contact to provide immediate handling strength.
- 4941 VHB
- 3M
3M - 4941 - VHB Grey Tape 18mm x 8.22m
5.00 out of 5
(1)
- 3Mâ„¢ VHBâ„¢ Tape 4941. It is a grey, 0.045 in (1.1 mm), multi-purpose acrylic adhesive with a conformable, foam core. It can replace rivets, welds and screws. The fast and easy to use permanent bonding method provides high strength and long-term durability. It offers design flexibility with its viscoelasticity and powerful ability to bond to a variety of surfaces. Fast and easy-to-use permanent bonding method provides high strength and long-term durability. Eliminate drilling, grinding, refinishing, screwing, welding and associated clean-up. Pressure sensitive adhesive bonds on contact to provide immediate handling strength.
- 4941 VHB
- 3M
3M - 4941 - VHB Grey Tape 25mm x 8.22m
5.00 out of 5
(1)
- 3Mâ„¢ VHBâ„¢ Tape 4941. It is a grey, 0.045 in (1.1 mm), multi-purpose acrylic adhesive with a conformable, foam core. It can replace rivets, welds and screws. The fast and easy to use permanent bonding method provides high strength and long-term durability. It offers design flexibility with its viscoelasticity and powerful ability to bond to a variety of surfaces. Fast and easy-to-use permanent bonding method provides high strength and long-term durability. Eliminate drilling, grinding, refinishing, screwing, welding and associated clean-up. Pressure sensitive adhesive bonds on contact to provide immediate handling strength.
- 4941 VHB
- 3M
3M - 4941 - VHB Grey Tape 584.22mm x 8.22m
5.00 out of 5
(1)
- 3Mâ„¢ VHBâ„¢ Tape 4941. It is a grey, 0.045 in (1.1 mm), multi-purpose acrylic adhesive with a conformable, foam core. It can replace rivets, welds and screws. The fast and easy to use permanent bonding method provides high strength and long-term durability. It offers design flexibility with its viscoelasticity and powerful ability to bond to a variety of surfaces. Fast and easy-to-use permanent bonding method provides high strength and long-term durability. Eliminate drilling, grinding, refinishing, screwing, welding and associated clean-up. Pressure sensitive adhesive bonds on contact to provide immediate handling strength.
- 4941 VHB
- 3M
3M - AFT - GREY TAPE BLISTER PACKING - 12MM X 4M
5.00 out of 5
(1)
- Attachment Tape is a high performance acrylic foam tape used widely for a variety of exterior & interior application. Acrylic adhesive is formulated for interior and exterior trim attachment to automotive substrates. Conformable closed cell acrylic foam core delivers excellent stress relaxation under load.
- AFT
- 3M
3M - AFT - GREY TAPE BLISTER PACKING - 25MM X 4M
5.00 out of 5
(1)
- Attachment Tape is a high performance acrylic foam tape used widely for a variety of exterior & interior application. Acrylic adhesive is formulated for interior and exterior trim attachment to automotive substrates. Conformable closed cell acrylic foam core delivers excellent stress relaxation under load.
- AFT
- 3M
3M - AFT - GREY TAPE BLISTER PACKING - 12MM X 10M
5.00 out of 5
(1)
- Attachment Tape is a high performance acrylic foam tape used widely for a variety of exterior & interior application. Acrylic adhesive is formulated for interior and exterior trim attachment to automotive substrates. Conformable closed cell acrylic foam core delivers excellent stress relaxation under load.
- Recommended Applications : Body side moldings, Weatherstrips, Bumper, roof and window moldings, Emblems, Door edge moldings, End rubber and pad protectors, Mud guards, Side visors
- AFT 3M Attachment Tape is a high-performance acrylic foam tape used widely for a variety of interior and exterior applications in the Automotive Professional Market.
- 3M
3M - AFT - GREY TAPE BLISTER PACKING - 25MM X 10M
5.00 out of 5
(1)
- Attachment Tape is a high performance acrylic foam tape used widely for a variety of exterior & interior application. Acrylic adhesive is formulated for interior and exterior trim attachment to automotive substrates. Conformable closed cell acrylic foam core delivers excellent stress relaxation under load.
- AFT
- 3M
3M 91091 CLEAR TISSUE TAPE - 12MM X 50M
5.00 out of 5
(1)
- High performance 90 Micron double coated tissue tape made of conformable tissue carrier and high performance pressure sensitive acrylic adhesive provides excellent adhesion to a variety of surfaces. Excellent adhesion to high surface energy plastics.
- Application ideas include attaching trims, labels, lining, fabric, web splicing, core starting and end tabbing.
- 91091 -tissue
- 3M
3M 4991 VHB Grey Tape - 18MM X 6.4M
5.00 out of 5
(1)
- 3Mâ„¢ VHBâ„¢ Tape is a high performance double-coated pressure sensitive acrylic foam tape. 3Mâ„¢ VHBâ„¢ Tapes have been used for many applications in the construction industry, including the manufacture of architectural panels for curtain walls and exterior building cladding. 3Mâ„¢ VHBâ„¢ Tapes are ideal for use in many exterior and interior architectural panel applications. In many situations, 3Mâ„¢ VHBâ„¢ Tapes can replace rivets, spot welds, liquid adhesives, and other permanent fasteners. Fast and easy-to-use permanent bonding method provides high strength and long-term durability. Eliminate drilling, grinding, refinishing, screwing, welding and associated clean-up. Pressure sensitive adhesive bonds on contact to provide immediate handling strength.
- Recommended application : Decorative material and trim Nameplates and logos Electronic displays Panel to frame Stiffener to panel
- 4991-VHB
- 3M
3M 4991 VHB Grey Tape - 25MM X 6.4M
5.00 out of 5
(1)
- 3Mâ„¢ VHBâ„¢ Tape is a high performance double-coated pressure sensitive acrylic foam tape. 3Mâ„¢ VHBâ„¢ Tapes have been used for many applications in the construction industry, including the manufacture of architectural panels for curtain walls and exterior building cladding. 3Mâ„¢ VHBâ„¢ Tapes are ideal for use in many exterior and interior architectural panel applications. In many situations, 3Mâ„¢ VHBâ„¢ Tapes can replace rivets, spot welds, liquid adhesives, and other permanent fasteners. Fast and easy-to-use permanent bonding method provides high strength and long-term durability. Eliminate drilling, grinding, refinishing, screwing, welding and associated clean-up. Pressure sensitive adhesive bonds on contact to provide immediate handling strength.
- Recommended application : Decorative material and trim Nameplates and logos Electronic displays Panel to frame Stiffener to panel
- 4991-VHB
- 3M
3M SGT VHB GREY TAPE - 12MM X 6.4M
5.00 out of 5
(1)
- 3M VHB Structural Glazing Tape is a double-coated 0.090 in (2.3 mm) pressure sensitive adhesive tape for bonding many painted metals, as well as unpainted metals, and higher surface energy plastics. 3M VHB Structural Glazing Tape is appropriate for applications, which demand a thicker conformable product.
- Each 3M™ VHB™ Structural Glazing Tape application will be reviewed on a project specific basis. Application guidelines will be based upon adhesion test results generated by 3M Technical Service. These project specific application guidelines will be provided to the customer and must be followed during the glass bonding process. Listed below are some typical application guidelines for a 3M™ VHB™ Structural Glazing Tape project. However, these do not replace the project specific application guidelines provided by the 3M Technical Service Representative. 1. For maximum bond strength, non-glass surfaces should be thoroughly cleaned with a 50/50 IPA/water mixture to remove contaminants. Glass surfaces should also be cleaned with a 50/50 IPA/water mixture followed by treatment of the glass with a mixture of an IPA/water/Silane solution prior to tape application. Contact 3M for further information on appropriate Silane mixtures. Some surfaces may require additional surface preparation that will be determined on a project specific basis by a 3M Technical Services Representative. 2. Ideal tape application is accomplished when temperature is between 21 °C and 38 °C and the bond is allowed to dwell 72 hours. Initial tape application to surfaces at temperatures below 16 °C is not recommended. However, the use of a primer may lower the minimum application temperature. Contact 3M for more information. 3. Bond strength is dependent upon the amount of adhesiveto-surface contact developed. Flat bonding surfaces and firm application pressure develops better adhesive contact and helps improve bond strength. Generally, this means that the tape should experience at least 100 kPa in roll down, vacuum or platen pressure. 3M must approve pressure application equipment for 3M™ VHB™ Structural Glazing Tape applications. 3. After final bonding of the parts, immediate handling strength is achieved and glazed units can be moved as there is no curing mechanism in this process. However, the bond strength will continue to increase as the adhesive flows onto the surface. At room temperature, approximately 50 % of the ultimate strength will be achieved in 10-20 minutes after pressure application, 90 % after 24 hours and 100 % after 72 hours. The use of a primer may accelerate the bond strength build rate. Contact 3M for more information.
- G23F
- 3M
3M SGT VHB GREY TAPE - 18MM X 6.4M
5.00 out of 5
(1)
- 3M VHB Structural Glazing Tape is a double-coated 0.090 in. (2.3 mm) pressure sensitive adhesive tape for bonding many painted metals, as well as unpainted metals, and higher surface energy plastics. 3M VHB Structural Glazing Tape is appropriate for applications, which demand a thicker conformable product.
- Each 3M™ VHB™ Structural Glazing Tape application will be reviewed on a project specific basis. Application guidelines will be based upon adhesion test results generated by 3M Technical Service. These project specific application guidelines will be provided to the customer and must be followed during the glass bonding process. Listed below are some typical application guidelines for a 3M™ VHB™ Structural Glazing Tape project. However, these do not replace the project specific application guidelines provided by the 3M Technical Service Representative. 1. For maximum bond strength, non-glass surfaces should be thoroughly cleaned with a 50/50 IPA/water mixture to remove contaminants. Glass surfaces should also be cleaned with a 50/50 IPA/water mixture followed by treatment of the glass with a mixture of an IPA/water/Silane solution prior to tape application. Contact 3M for further information on appropriate Silane mixtures. Some surfaces may require additional surface preparation that will be determined on a project specific basis by a 3M Technical Services Representative. 2. Ideal tape application is accomplished when temperature is between 21 °C and 38 °C and the bond is allowed to dwell 72 hours. Initial tape application to surfaces at temperatures below 16 °C is not recommended. However, the use of a primer may lower the minimum application temperature. Contact 3M for more information. 3. Bond strength is dependent upon the amount of adhesiveto-surface contact developed. Flat bonding surfaces and firm application pressure develops better adhesive contact and helps improve bond strength. Generally, this means that the tape should experience at least 100 kPa in roll down, vacuum or platen pressure. 3M must approve pressure application equipment for 3M™ VHB™ Structural Glazing Tape applications. 3. After final bonding of the parts, immediate handling strength is achieved and glazed units can be moved as there is no curing mechanism in this process. However, the bond strength will continue to increase as the adhesive flows onto the surface. At room temperature, approximately 50 % of the ultimate strength will be achieved in 10-20 minutes after pressure application, 90 % after 24 hours and 100 % after 72 hours. The use of a primer may accelerate the bond strength build rate. Contact 3M for more information.
- G23F
3M SGT VHB GREY TAPE - 25MM X 6.4M
5.00 out of 5
(1)
- 3M VHB Structural Glazing Tape is a double-coated 0.090 in. (2.3 mm) pressure sensitive adhesive tape for bonding many painted metals, as well as unpainted metals, and higher surface energy plastics. 3M VHB Structural Glazing Tape is appropriate for applications, which demand a thicker conformable product.
- Each 3M™ VHB™ Structural Glazing Tape application will be reviewed on a project specific basis. Application guidelines will be based upon adhesion test results generated by 3M Technical Service. These project specific application guidelines will be provided to the customer and must be followed during the glass bonding process. Listed below are some typical application guidelines for a 3M™ VHB™ Structural Glazing Tape project. However, these do not replace the project specific application guidelines provided by the 3M Technical Service Representative. 1. For maximum bond strength, non-glass surfaces should be thoroughly cleaned with a 50/50 IPA/water mixture to remove contaminants. Glass surfaces should also be cleaned with a 50/50 IPA/water mixture followed by treatment of the glass with a mixture of an IPA/water/Silane solution prior to tape application. Contact 3M for further information on appropriate Silane mixtures. Some surfaces may require additional surface preparation that will be determined on a project specific basis by a 3M Technical Services Representative. 2. Ideal tape application is accomplished when temperature is between 21 °C and 38 °C and the bond is allowed to dwell 72 hours. Initial tape application to surfaces at temperatures below 16 °C is not recommended. However, the use of a primer may lower the minimum application temperature. Contact 3M for more information. 3. Bond strength is dependent upon the amount of adhesiveto-surface contact developed. Flat bonding surfaces and firm application pressure develops better adhesive contact and helps improve bond strength. Generally, this means that the tape should experience at least 100 kPa in roll down, vacuum or platen pressure. 3M must approve pressure application equipment for 3M™ VHB™ Structural Glazing Tape applications. 3. After final bonding of the parts, immediate handling strength is achieved and glazed units can be moved as there is no curing mechanism in this process. However, the bond strength will continue to increase as the adhesive flows onto the surface. At room temperature, approximately 50 % of the ultimate strength will be achieved in 10-20 minutes after pressure application, 90 % after 24 hours and 100 % after 72 hours. The use of a primer may accelerate the bond strength build rate. Contact 3M for more information.
- SGT - VHB
3M - G23F - VHB BLACK TAPE - 12MM X 6.4M
5.00 out of 5
(1)
- 3M VHB Structural Glazing Tape is a double-coated 0.090 in. (2.3 mm) pressure sensitive adhesive tape for bonding many painted metals, as well as unpainted metals, and higher surface energy plastics. 3M VHB Structural Glazing Tape is appropriate for applications, which demand a thicker conformable product.
- Each 3M™ VHB™ Structural Glazing Tape application will be reviewed on a project specific basis. Application guidelines will be based upon adhesion test results generated by 3M Technical Service. These project specific application guidelines will be provided to the customer and must be followed during the glass bonding process. Listed below are some typical application guidelines for a 3M™ VHB™ Structural Glazing Tape project. However, these do not replace the project specific application guidelines provided by the 3M Technical Service Representative. 1. For maximum bond strength, non-glass surfaces should be thoroughly cleaned with a 50/50 IPA/water mixture to remove contaminants. Glass surfaces should also be cleaned with a 50/50 IPA/water mixture followed by treatment of the glass with a mixture of an IPA/water/Silane solution prior to tape application. Contact 3M for further information on appropriate Silane mixtures. Some surfaces may require additional surface preparation that will be determined on a project specific basis by a 3M Technical Services Representative. 2. Ideal tape application is accomplished when temperature is between 21 °C and 38 °C and the bond is allowed to dwell 72 hours. Initial tape application to surfaces at temperatures below 16 °C is not recommended. However, the use of a primer may lower the minimum application temperature. Contact 3M for more information. 3. Bond strength is dependent upon the amount of adhesiveto-surface contact developed. Flat bonding surfaces and firm application pressure develops better adhesive contact and helps improve bond strength. Generally, this means that the tape should experience at least 100 kPa in roll down, vacuum or platen pressure. 3M must approve pressure application equipment for 3M™ VHB™ Structural Glazing Tape applications. 3. After final bonding of the parts, immediate handling strength is achieved and glazed units can be moved as there is no curing mechanism in this process. However, the bond strength will continue to increase as the adhesive flows onto the surface. At room temperature, approximately 50 % of the ultimate strength will be achieved in 10-20 minutes after pressure application, 90 % after 24 hours and 100 % after 72 hours. The use of a primer may accelerate the bond strength build rate. Contact 3M for more information.
- G23F
3M - G23F - VHB BLACK TAPE - 18MM X 6.4M
5.00 out of 5
(1)
- 3M VHB Structural Glazing Tape is a double-coated 0.090 in. (2.3 mm) pressure sensitive adhesive tape for bonding many painted metals, as well as unpainted metals, and higher surface energy plastics. 3M VHB Structural Glazing Tape is appropriate for applications, which demand a thicker conformable product.
- "Each 3M™ VHB™ Structural Glazing Tape application will be reviewed on a project specific basis. Application guidelines will be based upon adhesion test results generated by 3M Technical Service. These project specific application guidelines will be provided to the customer and must be followed during the glass bonding process. Listed below are some typical application guidelines for a 3M™ VHB™ Structural Glazing Tape project. However, these do not replace the project specific application guidelines provided by the 3M Technical Service Representative. 1. For maximum bond strength, non-glass surfaces should be thoroughly cleaned with a 50/50 IPA/water mixture to remove contaminants. Glass surfaces should also be cleaned with a 50/50 IPA/water mixture followed by treatment of the glass with a mixture of an IPA/water/Silane solution prior to tape application. Contact 3M for further information on appropriate Silane mixtures. Some surfaces may require additional surface preparation that will be determined on a project specific basis by a 3M Technical Services Representative. 2. Ideal tape application is accomplished when temperature is between 21 °C and 38 °C and the bond is allowed to dwell 72 hours. Initial tape application to surfaces at temperatures below 16 °C is not recommended. However, the use of a primer may lower the minimum application temperature. Contact 3M for more information. 3. Bond strength is dependent upon the amount of adhesiveto-surface contact developed. Flat bonding surfaces and firm application pressure develops better adhesive contact and helps improve bond strength. Generally, this means that the tape should experience at least 100 kPa in roll down, vacuum or platen pressure. 3M must approve pressure application equipment for 3M™ VHB™ Structural Glazing Tape applications. 3. After final bonding of the parts, immediate handling strength is achieved and glazed units can be moved as there is no curing mechanism in this process. However, the bond strength will continue to increase as the adhesive flows onto the surface. At room temperature, approximately 50 % of the ultimate strength will be achieved in 10-20 minutes after pressure application, 90 % after 24 hours and 100 % after 72 hours. The use of a primer may accelerate the bond strength build rate. Contact 3M for more information. "
- G23F
3M - G23F - VHB GREY TAPE - 25MM X 6.4M
5.00 out of 5
(1)
- 3M VHB Structural Glazing Tape is a double-coated 0.090 in (2.3 mm) pressure sensitive adhesive tape for bonding many painted metals, as well as unpainted metals, and higher surface energy plastics. 3M VHB Structural Glazing Tape is appropriate for applications, which demand a thicker conformable product. Highly engineered acrylic adhesive provides long term durability, but removes cleanly after harsh masking applications. Creates a permanent seal against water, moisture and more. Pressure sensitive adhesive bonds on contact to provide immediate handling strength.
- "Each 3M™ VHB™ Structural Glazing Tape application will be reviewed on a project specific basis. Application guidelines will be based upon adhesion test results generated by 3M Technical Service. These project specific application guidelines will be provided to the customer and must be followed during the glass bonding process. Listed below are some typical application guidelines for a 3M™ VHB™ Structural Glazing Tape project. However, these do not replace the project specific application guidelines provided by the 3M Technical Service Representative. 1. For maximum bond strength, non-glass surfaces should be thoroughly cleaned with a 50/50 IPA/water mixture to remove contaminants. Glass surfaces should also be cleaned with a 50/50 IPA/water mixture followed by treatment of the glass with a mixture of an IPA/water/Silane solution prior to tape application. Contact 3M for further information on appropriate Silane mixtures. Some surfaces may require additional surface preparation that will be determined on a project specific basis by a 3M Technical Services Representative. 2. Ideal tape application is accomplished when temperature is between 21 °C and 38 °C and the bond is allowed to dwell 72 hours. Initial tape application to surfaces at temperatures below 16 °C is not recommended. However, the use of a primer may lower the minimum application temperature. Contact 3M for more information. 3. Bond strength is dependent upon the amount of adhesiveto-surface contact developed. Flat bonding surfaces and firm application pressure develops better adhesive contact and helps improve bond strength. Generally, this means that the tape should experience at least 100 kPa in roll down, vacuum or platen pressure. 3M must approve pressure application equipment for 3M™ VHB™ Structural Glazing Tape applications. 3. After final bonding of the parts, immediate handling strength is achieved and glazed units can be moved as there is no curing mechanism in this process. However, the bond strength will continue to increase as the adhesive flows onto the surface. At room temperature, approximately 50 % of the ultimate strength will be achieved in 10-20 minutes after pressure application, 90 % after 24 hours and 100 % after 72 hours. The use of a primer may accelerate the bond strength build rate. Contact 3M for more information. "
- G23F
- 3M
3M - G11F - VHB GREY TAPE - 12MM X 8.22M
5.00 out of 5
(1)
- 3Mâ„¢ VHBâ„¢ Tape is a high performance double-coated pressure sensitive acrylic foam tape. 3Mâ„¢ VHBâ„¢ Tapes have been used for many applications in the construction industry, including the manufacture of architectural panels for curtain walls and exterior building cladding. 3Mâ„¢ VHBâ„¢ Tapes are ideal for use in many exterior and interior architectural panel applications. In many situations, 3Mâ„¢ VHBâ„¢ Tapes can replace rivets, spot welds, liquid adhesives, and other permanent fasteners.
- Each 3M™ VHB™ Structural Glazing Tape application will be reviewed on a project specific basis. Application guidelines will be based upon adhesion test results generated by 3M Technical Service. These project specific application guidelines will be provided to the customer and must be followed during the glass bonding process. Listed below are some typical application guidelines for a 3M™ VHB™ Structural Glazing Tape project. However, these do not replace the project specific application guidelines provided by the 3M Technical Service Representative. 1. For maximum bond strength, non-glass surfaces should be thoroughly cleaned with a 50/50 IPA/water mixture to remove contaminants. Glass surfaces should also be cleaned with a 50/50 IPA/water mixture followed by treatment of the glass with a mixture of an IPA/water/Silane solution prior to tape application. Contact 3M for further information on appropriate Silane mixtures. Some surfaces may require additional surface preparation that will be determined on a project specific basis by a 3M Technical Services Representative. 2. Ideal tape application is accomplished when temperature is between 21 °C and 38 °C and the bond is allowed to dwell 72 hours. Initial tape application to surfaces at temperatures below 16 °C is not recommended. However, the use of a primer may lower the minimum application temperature. Contact 3M for more information. 3. Bond strength is dependent upon the amount of adhesiveto-surface contact developed. Flat bonding surfaces and firm application pressure develops better adhesive contact and helps improve bond strength. Generally, this means that the tape should experience at least 100 kPa in roll down, vacuum or platen pressure. 3M must approve pressure application equipment for 3M™ VHB™ Structural Glazing Tape applications. 3. After final bonding of the parts, immediate handling strength is achieved and glazed units can be moved as there is no curing mechanism in this process. However, the bond strength will continue to increase as the adhesive flows onto the surface. At room temperature, approximately 50 % of the ultimate strength will be achieved in 10-20 minutes after pressure application, 90 % after 24 hours and 100 % after 72 hours. The use of a primer may accelerate the bond strength build rate. Contact 3M for more information.
- G11F
3M - G11F - VHB GREY TAPE - 18MM X 8.22M
5.00 out of 5
(1)
- 3Mâ„¢ VHBâ„¢ Tape is a high performance double-coated pressure sensitive acrylic foam tape. 3Mâ„¢ VHBâ„¢ Tapes have been used for many applications in the construction industry, including the manufacture of architectural panels for curtain walls and exterior building cladding. 3Mâ„¢ VHBâ„¢ Tapes are ideal for use in many exterior and interior architectural panel applications. In many situations, 3Mâ„¢ VHBâ„¢ Tapes can replace rivets, spot welds, liquid adhesives, and other permanent fasteners.
- Each 3M™ VHB™ Structural Glazing Tape application will be reviewed on a project specific basis. Application guidelines will be based upon adhesion test results generated by 3M Technical Service. These project specific application guidelines will be provided to the customer and must be followed during the glass bonding process. Listed below are some typical application guidelines for a 3M™ VHB™ Structural Glazing Tape project. However, these do not replace the project specific application guidelines provided by the 3M Technical Service Representative. 1. For maximum bond strength, non-glass surfaces should be thoroughly cleaned with a 50/50 IPA/water mixture to remove contaminants. Glass surfaces should also be cleaned with a 50/50 IPA/water mixture followed by treatment of the glass with a mixture of an IPA/water/Silane solution prior to tape application. Contact 3M for further information on appropriate Silane mixtures. Some surfaces may require additional surface preparation that will be determined on a project specific basis by a 3M Technical Services Representative. 2. Ideal tape application is accomplished when temperature is between 21 °C and 38 °C and the bond is allowed to dwell 72 hours. Initial tape application to surfaces at temperatures below 16 °C is not recommended. However, the use of a primer may lower the minimum application temperature. Contact 3M for more information. 3. Bond strength is dependent upon the amount of adhesiveto-surface contact developed. Flat bonding surfaces and firm application pressure develops better adhesive contact and helps improve bond strength. Generally, this means that the tape should experience at least 100 kPa in roll down, vacuum or platen pressure. 3M must approve pressure application equipment for 3M™ VHB™ Structural Glazing Tape applications. 3. After final bonding of the parts, immediate handling strength is achieved and glazed units can be moved as there is no curing mechanism in this process. However, the bond strength will continue to increase as the adhesive flows onto the surface. At room temperature, approximately 50 % of the ultimate strength will be achieved in 10-20 minutes after pressure application, 90 % after 24 hours and 100 % after 72 hours. The use of a primer may accelerate the bond strength build rate. Contact 3M for more information.
- G11F
3M - G11F - VHB GREY TAPE - 25MM X 8.22M
5.00 out of 5
(1)
- 3Mâ„¢ VHBâ„¢ Tape is a high performance double-coated pressure sensitive acrylic foam tape. 3Mâ„¢ VHBâ„¢ Tapes have been used for many applications in the construction industry, including the manufacture of architectural panels for curtain walls and exterior building cladding. 3Mâ„¢ VHBâ„¢ Tapes are ideal for use in many exterior and interior architectural panel applications. In many situations, 3Mâ„¢ VHBâ„¢ Tapes can replace rivets, spot welds, liquid adhesives, and other permanent fasteners. Fast and easy-to-use permanent bonding method provides high strength and long-term durability. Creates a permanent seal against water, moisture and more. Allows the use of thinner, lighter weight and dissimilar materials.
- Recommended Applications : Architectural panels for curtain walls Exterior building cladding Interior panel and trim attachment
- G11F
- 3M
3M - 4941 - VHB Grey Tape 12mm x 8.22m
5.00 out of 5
(1)
- 3Mâ„¢ VHBâ„¢ Tape 4941. It is a grey, 0.045 in (1.1 mm), multi-purpose acrylic adhesive with a conformable, foam core. It can replace rivets, welds and screws. The fast and easy to use permanent bonding method provides high strength and long-term durability. It offers design flexibility with its viscoelasticity and powerful ability to bond to a variety of surfaces. Fast and easy-to-use permanent bonding method provides high strength and long-term durability. Eliminate drilling, grinding, refinishing, screwing, welding and associated clean-up. Pressure sensitive adhesive bonds on contact to provide immediate handling strength.
- 4941 VHB
- 3M
3M - 4941 - VHB Grey Tape 18mm x 8.22m
5.00 out of 5
(1)
- 3Mâ„¢ VHBâ„¢ Tape 4941. It is a grey, 0.045 in (1.1 mm), multi-purpose acrylic adhesive with a conformable, foam core. It can replace rivets, welds and screws. The fast and easy to use permanent bonding method provides high strength and long-term durability. It offers design flexibility with its viscoelasticity and powerful ability to bond to a variety of surfaces. Fast and easy-to-use permanent bonding method provides high strength and long-term durability. Eliminate drilling, grinding, refinishing, screwing, welding and associated clean-up. Pressure sensitive adhesive bonds on contact to provide immediate handling strength.
- 4941 VHB
- 3M
3M - 4941 - VHB Grey Tape 25mm x 8.22m
5.00 out of 5
(1)
- 3Mâ„¢ VHBâ„¢ Tape 4941. It is a grey, 0.045 in (1.1 mm), multi-purpose acrylic adhesive with a conformable, foam core. It can replace rivets, welds and screws. The fast and easy to use permanent bonding method provides high strength and long-term durability. It offers design flexibility with its viscoelasticity and powerful ability to bond to a variety of surfaces. Fast and easy-to-use permanent bonding method provides high strength and long-term durability. Eliminate drilling, grinding, refinishing, screwing, welding and associated clean-up. Pressure sensitive adhesive bonds on contact to provide immediate handling strength.
- 4941 VHB
- 3M
3M - 4941 - VHB Grey Tape 584.22mm x 8.22m
5.00 out of 5
(1)
- 3Mâ„¢ VHBâ„¢ Tape 4941. It is a grey, 0.045 in (1.1 mm), multi-purpose acrylic adhesive with a conformable, foam core. It can replace rivets, welds and screws. The fast and easy to use permanent bonding method provides high strength and long-term durability. It offers design flexibility with its viscoelasticity and powerful ability to bond to a variety of surfaces. Fast and easy-to-use permanent bonding method provides high strength and long-term durability. Eliminate drilling, grinding, refinishing, screwing, welding and associated clean-up. Pressure sensitive adhesive bonds on contact to provide immediate handling strength.
- 4941 VHB
- 3M
3M - AFT - GREY TAPE BLISTER PACKING - 12MM X 4M
5.00 out of 5
(1)
- Attachment Tape is a high performance acrylic foam tape used widely for a variety of exterior & interior application. Acrylic adhesive is formulated for interior and exterior trim attachment to automotive substrates. Conformable closed cell acrylic foam core delivers excellent stress relaxation under load.
- AFT
- 3M
3M - AFT - GREY TAPE BLISTER PACKING - 25MM X 4M
5.00 out of 5
(1)
- Attachment Tape is a high performance acrylic foam tape used widely for a variety of exterior & interior application. Acrylic adhesive is formulated for interior and exterior trim attachment to automotive substrates. Conformable closed cell acrylic foam core delivers excellent stress relaxation under load.
- AFT
- 3M
3M - AFT - GREY TAPE BLISTER PACKING - 12MM X 10M
5.00 out of 5
(1)
- Attachment Tape is a high performance acrylic foam tape used widely for a variety of exterior & interior application. Acrylic adhesive is formulated for interior and exterior trim attachment to automotive substrates. Conformable closed cell acrylic foam core delivers excellent stress relaxation under load.
- Recommended Applications : Body side moldings, Weatherstrips, Bumper, roof and window moldings, Emblems, Door edge moldings, End rubber and pad protectors, Mud guards, Side visors
- AFT 3M Attachment Tape is a high-performance acrylic foam tape used widely for a variety of interior and exterior applications in the Automotive Professional Market.
- 3M
3M - AFT - GREY TAPE BLISTER PACKING - 25MM X 10M
5.00 out of 5
(1)
- Attachment Tape is a high performance acrylic foam tape used widely for a variety of exterior & interior application. Acrylic adhesive is formulated for interior and exterior trim attachment to automotive substrates. Conformable closed cell acrylic foam core delivers excellent stress relaxation under load.
- AFT
- 3M
3M 91091 CLEAR TISSUE TAPE - 12MM X 50M
5.00 out of 5
(1)
- High performance 90 Micron double coated tissue tape made of conformable tissue carrier and high performance pressure sensitive acrylic adhesive provides excellent adhesion to a variety of surfaces. Excellent adhesion to high surface energy plastics.
- Application ideas include attaching trims, labels, lining, fabric, web splicing, core starting and end tabbing.
- 91091 -tissue
- 3M
Showing 981–1000 of 1101 results
